-40%
4-port Light-tight Cuvette Holder/Housing, 3/8
4-port Light-tight Cuvette Holder/Housing, 3/8
4-port Light-tight Cuvette Holder/Housing, 3/8
4-port Light-tight Cuvette Holder/Housing, 3/8
4-port Light-tight Cuvette Holder/Housing, 3/8
4-port Light-tight Cuvette Holder/Housing, 3/8
4-port Light-tight Cuvette Holder/Housing, 3/8
4-port Light-tight Cuvette Holder/Housing, 3/8
4-port Light-tight Cuvette Holder/Housing, 3/8
4-port Light-tight Cuvette Holder/Housing, 3/8
4-port Light-tight Cuvette Holder/Housing, 3/8
4-port Light-tight Cuvette Holder/Housing, 3/8

4-port Light-tight Cuvette Holder/Housing, 3/8"-24 UNF (without fiber adaptor)

$ 34.32

Availability: 21 in stock
  • Restocking Fee: No
  • All returns accepted: Returns Accepted
  • Brand: P3S
  • Refund will be given as: Money Back
  • Item must be returned within: 30 Days
  • Bundle Listing: No
  • Country/Region of Manufacture: United States
  • Return shipping will be paid by: Buyer
  • Condition: New

    Description

    Light-Tight Cuvette Housing (without fiber connector)
    This listing is for those who already have their own collimator/connector.
    SMA 905 (receptacles and collimators) and FC/PC (
    receptacle only)
    adaptors are available upon request.
    What are included in this list (as shown in the first figure):
    Only one light-tight cuvette housing (up to 12.5x12.5x52 mm cuvette)      [Quantity=1]
    Total 4 ports with 3/8"-24 UNF thread (for SMA 905 adaptors/collimators/focus lens)
    Two ports are plugged with 3/8"-24 x 1/4" SS screws by default.
    Versatile f
    eatures include
    (1) Bottom: Diameter 1.5"x1/4" Plate with two 4-40 threaded mounting holes, two slots for 4-40 screws, one 8-32 threaded hole (with set screw installed as default).
    (2) Side: Two 4-40 threaded holes (with set screws installed as default configuration).
    (3) Side: Allow up to four SMA 905 adaptors, collimators, or focusing lens in 3/8"-24 threaded mounts.
    (4) Top:
    One 4-40x1/2 (or your choice of other lengths) to push on the lid of cuvette inside the housing.
    Rev. 0: Two 4-40x1-1/4 screws to lock the lid to create a light-tight sealed housing.
    Rev. 1: One 4-40x1-1/4 screw and one 4-40 cone-tipped pin for faster operation.
    This is shown in the 3rd image and will be the default unless you request to use the older Rev.0.
    (5) Dimensions: Dia. 1.5"x 1.5" for the bottom cuvette housing, 1.00"x1.00"x1.125" for the top cover.
    It can be used with most of compact fiber optic spectrometer application for transmission, reflection, fluorescence, Raman signal collection.
    Educational discount
    - please use your school/academic email address to request.
    Other shipping options may be
    available upon request.
    The access ports are  fully compatible and interchangeable with our UV-NIR adjustable fiber collimator and
    SMA 905 adaptors/connectors
    !
    The collimators are adjusted for best collimating effect at 200-2200 nm. Aligned with Xenon lamp and UV fused silica fiber cable. They are
    not
    included in this package.
    You may choose up to four collimators/focusing lens to use with this cuvette/sample housing by contacting us.
    As an example, two collimators are shown mounted to the OceanOptics's filter bench.
    Technical data for the collimator:
    Model: P3S-SMA905-Col050PX
    Batch:  PQA017-0708-01PX
    Lens Diameter (mm):  5.0
    Clear Aperture (mm) : 3.8
    Focal Length (mm):     8.3
    Numerical Aperture:   0.23
    Lens Material:           Fused Silica
    Wavelength range:    200-2000nm (best alignment range)
    Fiber connection:      SMA 905 (UNS 1/4”-36), Stainless Steel connector
    Housing Material:         Aluminum(anodize) and Stainless Steel
    Thread and interface:  Dual interfaces (UNF 3/8"-24, and Smooth Dia. 1/2")
    Temperature (°C):        -30 to 150 °C
    (contact us for wider temperature ranges)