9,000 Btu 24 Seer Mitsubishi Single Zone Mini Split Hyper Heat Pump System

Description

The interior component (air handler) can be purchased through www.ecomfort.com/Mitsubishi-MSZ-FH09NA. This is a wall mounted heat pump mini split indoor unit that matches this exterior compressor. You can call the 800 number on the ecomfort.com website for information and ordering.
> Advanced Filtration System: The MSZ-FH09NA uses two advanced filters to clean and deodorize the circulated air. The deodorizing filter absorbs any offending smells, while the second is an enzyme based anti-allergy filter that captures and destroys bacteria and particulates.
> I-see Sensor 3D: Will monitor the zone for fluctuations in temperature. If it detects an underserved area, the MSZ-FH09NA will temporarily direct air flow to that specific zone. It also enters an energy saving mode if no human heat signatures are detected.
> Hot Start: Mitsubishi’s hot start technology prevents cold drafts by delaying fan operation until the heat exchanger has warmed up.
> Powerful Mode: Makes it easy to get the zone to the perfect temperature quickly. When activated, it temporarily increases the refrigerant flow and fan speed to provide quick comfort through rapid heating or cooling
> Dehumidification: When it runs in dry mode, the coil’s temperature says just below the dew point of the return air, removing unwanted moisture.
> Vane Control: Optimal air flow can be achieved thanks to two vane control options, standard and wide. Auto mode selects the best vane position based on the operating mode while the swing mode cycles through each vane position.